This tutorial explains how to install the AKA 3 chicken loop on your bar (either a Kite Attitude bar, or any other kite control bar). You will learn how to convert an existing AKA 1 or AKA 2 chicken loop to a AKA 3 version, with the upgrade kit, or replace an old chicken loop with the new AKA 3.
This tutorial shows a simple way to add a 5th line to a 4 line bar. You will be able to remove it quickly if you want to revert your bar to a 4 line bar.
This tutorial explains how to adjust the lines and leader lines of a Kite Attitude universal bar. These principles are the same for other bars on the market.
Mount the stopper ball on the front line to prevent the bar from sliding to the wing and to facilitate relaunching.
This tutorial explains how to setup up the rope into the Aerocleat. By the same token, you can move it up or down. If you move it down, young people can grab the trim handle more easily. If you move it up, wave riders and hydrofoilers will enjoy a larger depower. This concerns the non coated depower rope and trim, not the coated depower rope.
This Tutorial shows you how to change the length of the back leader lines on a universal freestyle wave bar, set up with a "low V" (it means there is no front leader line, the power lines are connected right after the trim pulley). If you are riding with a Totem or Totem Vario, this tutorial is pretty much useless for you, since you can change the length very easily where the back end connectors are (below the floaters).
