Set of 2 mini leader line extensions. Can be installed at the briddle of the kite or on the bar, usually the back/steering lines.
3 mm dyneema, about 60 cm long.
Available in different colors.
Ideal to customize your universal bar or make adjustments to specific kites (Best Kahoona, Slingshot RPM, ...) or old kites (C Shape) prior to 2008.
These mini extenders can be useful for several purposes:
1) you can create an offset and shift the point where the kite lines will cross (kite loop).
2) you can add more depower to a foil kite, in case you are not using our race foil universal bar.
3) you can offset a discrepancy between front and steering lines when you sheet in completely (this can be useful for some older kites like the Best Kahoona, Slingshot RPM or Genetrix Hydra, and all kites prior to 2008 (C Shape), that did not have a sustained leading edge).
Ask us for best settings/dimensions!
This connector is meant to connect the front lines directly to the trim pulley.
Works for all kite school bars, race foil bars, and all bars with no front leader lines (4 direct lines).
Chicken loop rope for AKA quick releaser version 1, 2 or 3.
3 sizes are available: XS, S, M
The new XS size works only for XS chicken loop without donkey dick, for rope harnesses.
Ultra-resistant pulley, capable of supporting up 700 kg. It offers optimal comfort for pull the trim easily And is right above the cuckold cleat.
New AKA quick releaser: revolutionizing the kitesurfing world!
This is the shortest quick releaser on the market, with a swivel on top. It is about 1 1/2 to 2 inches shorter than usual quick releasers/chicken loops.
Highly secure: requires very little strength to release in case the kite pulls very hard (French Afnor NF S 52-503).
All the parts you need to convert a AKA 1 or AKA 2 chicken loop into a fully functional AKA 3 chicken loop!
This stopper ball has been specially designed for maximum durability with glass fiber.
T bone for AKA 1, 2 or 3 QR. The T-Bone is positioned at the end of the Chicken Loop and available in 2 materials, stainless steel or alloy.
The Kite Attitude Carbon Race Foil Bar Depower Rope is an essential component of the control system, ensuring smooth, precise, and safe riding. Designed specifically for competition-grade carbon bars and AKA 3 or 4 quick release systems (it also works with older versions 1 and 2), it offers excellent wear resistance and optimal comfort, whether you’re kitesurfing, foiling, or snowkiting.
Available either with PU coating or Textile Sleeve.
Small chicken loop and donkey dick for AKA 1, 2 or 3 quick releasers.
S size.
Ideal for young people, wave riding and hydrofoiling.
This line stopper is meant to stop the control bar from reaching the kite, once you have triggered the quick releaser.
It must be installed on the line connected to the safety line, which, in turn, is connected to the leash.
Stainless steel ring with opening for front kite line.
This is a new ring for 2017, which replaces the traditional ring with stop ball that retains the front line that is connected to the safety rope and leash.
This special ring brings extra security, because the opening through which the line goes has always the same dimension, and will keep it overtime, unlike a stopball.
Set of 2 floaters for Totem Vario universal bars, or many other bars on the market. Ideal for replacing or improving your original floats.
Half ball.
This stop ball can be used together with a double ring connected to the safety line. A simple way to prevent the safety line from being wrapped around the depower rope after many kite loops/down loops.
This screw-on stopper ball is meant to be installed below the Clamcleat onto the depower rope.
It will protect the Aerocleat if the bar hits the cleat.
The Instinct Pro Model Kite Attitude Bar is ideal for all practices: Freeride, wave, foil and freestyle. This new version integrates a sheathed depower rope For comfort and durability, as well as the latest AKA 4 QR. Perfect for inflatable kites, single skin kites or hybrid kites in 4 or 5 lines.
A unique accessory to move the split point of your control bar up or down!
It was designed to address a concern of those who consider it is necessary to have the split point at the same place as the original control bar.
It is very smart: no wrench or screwdriver required, just press it to change the height of the split point. It is does not damage your lines.
Learn more...
Stainless steel ring with opening for front kite line.
This is a new ring for 2017, which replaces the traditional ring with stop ball that retains the front line that is connected to the safety rope and leash.
This special ring brings extra security, because the opening through which the line goes has always the same dimension, and will keep it overtime, unlike a stopball.
The CLAMCLEAT RACING AEROCLEAT is the absolute reference in cleats for kitesurfing. Its plastic base makes it easy to adjust the CLAMCLEAT position in height on the depower rope, in order to accurately set the length and height of the depower rope according to your practice and your size (adult, child, ...).
The Reference bar for kitesurfing schools evolves with a border shocking sheathed and one Ultra solid splitter. Adopted by dozens of schoolsthe Universal Bar Kite Attitude guarantees reliability and safety for teaching.
Professional rates and IKO versions (short lines + extensions) available on request.
Ultra-resistant pulley, capable of supporting up 700 kg. It offers optimal comfort for pull the trim easily And is right above the cuckold cleat.
Set of 2 mini leader line extensions. Can be installed at the briddle of the kite or on the bar, usually the back/steering lines.
3 mm dyneema, about 60 cm long.
Available in different colors.
Ideal to customize your universal bar or make adjustments to specific kites (Best Kahoona, Slingshot RPM, ...) or old kites (C Shape) prior to 2008.
