Kite attitude Safety Line connecting the leash ring and one of the power lines of the kite.
This Kite Attitude safety line includes an bungee that keeps the leash perfectly held under the quick release to prevent it from moving around or getting tangled while riding.
It is made of high-quality 3 mm Dyneema, with an exceptional strength of 700 kg, ensuring maximum safety in all conditions.
On bars with a Y (formerly called Pro Model), the safety line is sheathed to further increase its robustness and durability.
- Short line for low V bars or school bars
4-line direct setup, right after the trim pulley (without a front pre-line).
Stretched length: ~1.21 m
- Long line for bars with a high splitpoint (Y)
Designed for a setup with a small Y on the front lines (about 1.12 m before the split of the front lines).
Stretched length: ~2.26 m
- Line for race/foil bar
Designed for double-pulley trims on race/foil bars.
Stretched length: ~1.45 m
Want to replace the safety line? Follow these instructions to download the guide.
This connector is meant to connect the front lines directly to the trim pulley.
Works for all kite school bars, race foil bars, and all bars with no front leader lines (4 direct lines).
This line stopper is meant to stop the control bar from reaching the kite, once you have triggered the quick releaser.
It must be installed on the line connected to the safety line, which, in turn, is connected to the leash.
The Kite Attiude freestyle wave bar (stick only) offers an ergonomic and very soft grip, allowing to navigate for hours without fatigue or bulbs. Comfort and precision guaranteed for all your sessions.
Upgrade kit to convert a AKA 1 chicken loop to a AKA 2 version.
The swivel and T bone are now made of light alloy.
This kit only contains an alloy swivel and an alloy T Bone. It does not contain the chicken loop nor the quick releaser. It assumes you already have a AKA chicken loop/quick releaser.
Small stainless steel ring, for guiding the safety line next to the Clamcleat.
Ultra-resistant pulley, capable of supporting up 700 kg. It offers optimal comfort for pull the trim easily And is right above the cuckold cleat.
This stopper ball has been specially designed for maximum durability with glass fiber.
Dyneema Depower Rope and Trim
Comes with a trim handle covered with Velcro to easily hook the trim handle next to the clamcleat after trimming. A set ultra-resistant, ideal for replacing or optimizing your trim system.
Break strap for land kiting and/or foil kites.
This strap connects to the two back leader lines of the bar. When pulling the break, the kite is deflated and falls off to the ground.
The kite bar Carbon Ultra V2 (stick only) signed Kite attitude is an exceptional bar, thought to offer a Ultra precise piloting, a proper strength and one featherweight. Designed to excel in all disciplines, competition, Freeride, foil or Snow Kite
The Kite Carbon Ultra V2 bar reveals all its versatility. Its carbon construction ensures a optimal rigidity and an direct steering, offering a perfect control and a specific feeling on water, snow or ice. Supplied with the connectors for the leader lines, this bar combines practicality and reliability.
Connectors for Kite Attitude leader lines specially designed for Totem Vario and Carbon Ultra control bars to ensure clean, reliable and perfectly adjusted mounting.
Small stainless steel ring, for guiding the safety line next to the Clamcleat.
Set of 2 power lines.
Real dyneema lines.
Strength higher than 400 kg.
The best possible quality. Low (or no) stretch at all.
Dyneema Depower Rope and Trim
Comes with a trim handle covered with Velcro to easily hook the trim handle next to the clamcleat after trimming. A set ultra-resistant, ideal for replacing or optimizing your trim system.
A unique accessory to move the split point of your control bar up or down!
It was designed to address a concern of those who consider it is necessary to have the split point at the same place as the original control bar.
It is very smart: no wrench or screwdriver required, just press it to change the height of the split point. It is does not damage your lines.
Learn more...
Half ball.
This stop ball can be used together with a double ring connected to the safety line. A simple way to prevent the safety line from being wrapped around the depower rope after many kite loops/down loops.
Stock clearance.
Strength: 425 kg.
Set of 4 lines, folded around a winder.
The Kite Bar Carbon Ultra V3 of Kite attitude is a high performance kite control bar designed to provide precise steering, exceptional strength and a super light weight. Developed and tested by Maxime Nocher, multiple world champion of Kitefoil Race. This bar pushes the limits of performance for all demanding riders.
In simple pulley for leisure practice, freeride or snowkite, and in double pulley (3:1) for ram air kites or racing, it guarantees precise control and an instant response.
Chicken loop rope for AKA quick releaser version 1, 2 or 3.
3 sizes are available: XS, S, M
The new XS size works only for XS chicken loop without donkey dick, for rope harnesses.
Kite attitude Safety Line connecting the leash ring and one of the power lines of the kite.
