Universal kit for carbon race foil bars
Universal kit for race foil bar.
Ideal for carbon bars. Trim with double pulley.
3 world champions use this standard setup!
The kite bar Carbon Ultra V2 (stick only) signed Kite attitude is an exceptional bar, thought to offer a Ultra precise piloting, a proper strength and one featherweight. Designed to excel in all disciplines, competition, Freeride, foil or Snow Kite
The Kite Carbon Ultra V2 bar reveals all its versatility. Its carbon construction ensures a optimal rigidity and an direct steering, offering a perfect control and a specific feeling on water, snow or ice. Supplied with the connectors for the leader lines, this bar combines practicality and reliability.
Thanks to a new manufacturing technology, the Carbon Ultra kite bar from Kite Attitude offers an exceptional 60% weight reduction, while maintaining optimal strength. The bars are hollow, which reduces mass without compromising resistance. The tubes, now 5 mm thinner, improve air penetration and steering precision. Result: you feel your kite even better, even in the lightest wind variations.
Versatile, the Carbon Ultra excels in kitesurf, foil, snowkite and race. It suits both recreational riders and competitors looking for maximum performance. Perfect to push the limits of the low end, it remains ultra efficient in the most powered conditions. This new carbon bar is ideal for those seeking the best responsiveness and absolute precision, whether in light, medium or strong wind.
The Carbon Ultra isn’t reserved for champions: if you ride foil in very light wind, it will help keep your kite flying through lulls and explore the low end more safely. Thanks to its ultra-light weight, the kite + bar setup is less likely to stall or fall into the water. Its lightness improves steering finesse: you feel every movement of the kite, every gust and every wind change with precision.
Built to last, the Carbon Ultra bar is probably the strongest on the market. The critical areas — center and ends — have been reinforced to prevent any breakage, even in race competition or downwind foil. The goal: it should never break, whatever the discipline or wind strength.
Available in 4 sizes: 45 cm - 52 cm - 55 cm - 60 cm

Choosing the width directly affects kitesurf kite handling. A wider bar makes fast turns easier, while a narrower bar gives more control in strong wind or for snowkite.
- 45 cm: kites from 3 to 6 m²
- 52 cm: kites from 7 to 8 m²
- 55 cm: kites from 9 to 12 m²
- 60 cm: kites 13 m² and above
With short lines (12 to 15 m), you can choose a slightly narrower bar.

Unlike some competing carbon bars, the Carbon Ultra benefits from an effective non-slip grip, even when wet. The hold remains firm and comfortable in all conditions. The carbon bar is built like MTB handlebars, with compressed-air bladders inside. They compress the resin into the fiber. And finally, assembly is done in France
You might also like
Universal kit for race foil bar.
Ideal for carbon bars. Trim with double pulley.
3 world champions use this standard setup!
Universal upgrade kit to build a universal bar compatible with all kites on the market.
You already have a bar and kite lines: the universal upgrade kit is for you!
This line stopper is meant to stop the control bar from reaching the kite, once you have triggered the quick releaser.
It must be installed on the line connected to the safety line, which, in turn, is connected to the leash.
Half ball.
This stop ball can be used together with a double ring connected to the safety line. A simple way to prevent the safety line from being wrapped around the depower rope after many kite loops/down loops.
A unique accessory to move the split point of your control bar up or down!
It was designed to address a concern of those who consider it is necessary to have the split point at the same place as the original control bar.
It is very smart: no wrench or screwdriver required, just press it to change the height of the split point. It is does not damage your lines.
Learn more...
Elastics for universal freestyle wave control bars
Scroll this page down to view instructions to install the elastics on the universal freestyle wave control bar.
This screw-on stopper ball is meant to be installed below the Clamcleat onto the depower rope.
It will protect the Aerocleat if the bar hits the cleat.
New: the splitter!
This unique part controls the power lines, for 4 lines or 5 lines kites.
Super light and super strong! Made of alloy, no more than 20 g.
Designed and invented by Kite Attitude!
New AKA quick releaser: revolutionizing the kitesurfing world!
This is the shortest quick releaser on the market, with a swivel on top. It is about 1 1/2 to 2 inches shorter than usual quick releasers/chicken loops.
Highly secure: requires very little strength to release in case the kite pulls very hard (French Afnor NF S 52-503).
Set of 2 floaters for Totem Vario universal bars, or many other bars on the market. Ideal for replacing or improving your original floats.
Coated depower throw for single pulley trim.
2 sizes: standard (50 cm) or large (60 cm) for foil kites or big kites
PU coating or textile coating
All the parts you need to convert a AKA 1 or AKA 2 chicken loop into a fully functional AKA 3 chicken loop!
Chicken loop rope for AKA quick releaser version 1, 2 or 3.
3 sizes are available: XS, S, M
The new XS size works only for XS chicken loop without donkey dick, for rope harnesses.
The CLAMCLEAT RACING AEROCLEAT is the absolute reference in cleats for kitesurfing. Its plastic base makes it easy to adjust the CLAMCLEAT position in height on the depower rope, in order to accurately set the length and height of the depower rope according to your practice and your size (adult, child, ...).
The Kite Attitude Carbon Race Foil Bar Depower Rope is an essential component of the control system, ensuring smooth, precise, and safe riding. Designed specifically for competition-grade carbon bars and AKA 3 or 4 quick release systems (it also works with older versions 1 and 2), it offers excellent wear resistance and optimal comfort, whether you’re kitesurfing, foiling, or snowkiting.
Available either with PU coating or Textile Sleeve.
Antal Friction Ring for Rope Harnesses.
This ring brings great comfort when riding waves with a rope harness. The ring slides smoothly along the rope. The rope and the chicken loop tube are preserved from wear due to friction. This ring improves your safety.
Small stainless steel ring, for guiding the safety line next to the Clamcleat.
You want to fly any kite on the market, with the same Control Bar, from 4 m2 to 14 m2? 4 or 5 lines? Inflatable or foil kite?
The Totem Vario Pro Model is the true universal bar that can do it!
It takes only 2 seconds to change the spacing between the steering lines. You can speed up your kite or slow it down. The only bar on the market to offer such versatility
Here is Ideal universal bar Kite kite attitude for freestyle, foil and wave
Compatible in 4 or 5 lines. Ultra light (≈ 450 g), it integrates the New AKA 3 with stainless steel ball bearing and High-end lines in Dyneema, without elasticity for instantaneous control. Perfect for inflatable kites, single skin kites, or foil kites.
Set of 2 Kite attitude back leader lines available in green / blue or red / blue. In Dyneema 3 mm
Each leader line is equipped with a spliced loop for a simple and secure connection. Solidity of about 700 kg for maximum reliability.
The Reference bar for kitesurfing schools evolves with a border shocking sheathed and one Ultra solid splitter. Adopted by dozens of schoolsthe Universal Bar Kite Attitude guarantees reliability and safety for teaching.
Professional rates and IKO versions (short lines + extensions) available on request.
The Kite Attiude freestyle wave bar (stick only) offers an ergonomic and very soft grip, allowing to navigate for hours without fatigue or bulbs. Comfort and precision guaranteed for all your sessions.
Elastics for universal freestyle wave control bars
Scroll this page down to view instructions to install the elastics on the universal freestyle wave control bar.
Set of 2023 Totem Vario floaters with leader lines.
Available in 2 colors: red blue or green blue