A unique accessory to move the split point of your control bar up or down!
It was designed to address a concern of those who consider it is necessary to have the split point at the same place as the original control bar.
It is very smart: no wrench or screwdriver required, just press it to change the height of the split point. It is does not damage your lines.
Learn more...
You want to change the height of the split point on your bar? This accessory lets you move the split point up or down on the front lines, to increase or reduce the height of the split point.
If you want to match exactly the features of a given bar, you can do it.
No tool required to install it.
FIRST, WE NEED TO SAY THAT THIS ACCESSORY IS NOT MANDATORY for the Kite Attitude universal bars. A vast majority of Kite Attitude users are very very happy with the bars as they are. This smart tool was designed to give an answer to those who think it is necessary to have the very same height of split point as the manufacturer's control bar.
Let us remind you of a number of points:
1) Most pro riders tend to remove the split point and convert their bar into a 4 direct line bar, just like "in the old times" (C kites...). This gives more "slack" for unhooked moves (in other words, it feels lighter for your arms when unhooking).
2) kite school instructors appreciate 4 direct lines too (4 direct lines is the default setup of our kite school bars). Of course kite instructors use all kite brands... If the trainee lets the kite roll onto itself and crossed the front and steering lines, it is easier to pass the bar in between the front lines to uncross the lines.
3) the higher the split point, the shorter the radius of the curve when the kite turns (the kite will tend to turn more onto its ears). Is this good or bad? It is really a matter of personal taste and feeling. Pros : in the waves, when changing directions, the kite may turn faster. Cons: you may loose a bit of power when launching the kite into the window, as the radius will be shorter.
4) the length of the kite lines has probably much more influence on the behaviour of the kite, than the height of the split point.
We suggest that you watch these 2 videos: they prove you can have a lot of fun with the Kite Attitude universal bars and the major kite brands, without changing the split point:
Again, there is nothing scientific, it is really a matter of personal taste/feeling to have a low or high split point. And we have the solution!
Elastics for universal freestyle wave control bars
Scroll this page down to view instructions to install the elastics on the universal freestyle wave control bar.
Set of 2 floaters for Totem Vario universal bars, or many other bars on the market. Ideal for replacing or improving your original floats.
Set of 2023 Totem Vario floaters with leader lines.
Available in 2 colors: red blue or green blue
Half ball.
This stop ball can be used together with a double ring connected to the safety line. A simple way to prevent the safety line from being wrapped around the depower rope after many kite loops/down loops.
The Kite Attitude freestyle wave stick offers an ergonomic and very soft grip, ideal for navigating hours without fatigue or bulbs. Perfect for those looking for comfort and precision in kite.
Set of 2 mini leader line extensions. Can be installed at the briddle of the kite or on the bar, usually the back/steering lines.
3 mm dyneema, about 60 cm long.
Available in different colors.
Ideal to customize your universal bar or make adjustments to specific kites (Best Kahoona, Slingshot RPM, ...) or old kites (C Shape) prior to 2008.
Dyneema Depower Rope and Trim
Comes with a trim handle covered with Velcro to easily hook the trim handle next to the clamcleat after trimming. A set ultra-resistant, ideal for replacing or optimizing your trim system.
Universal kit for race foil bar.
Ideal for carbon bars. Trim with double pulley.
3 world champions use this standard setup!
Coated depower throw for single pulley trim.
2 sizes: standard (50 cm) or large (60 cm) for foil kites or big kites
PU coating or textile coating
Break strap for land kiting and/or foil kites.
This strap connects to the two back leader lines of the bar. When pulling the break, the kite is deflated and falls off to the ground.
Kite attitude Safety Line connecting the leash ring and one of the power lines of the kite.
Standard Chicken Loop and Donkey Dick for AKA 1, 2 or 3 quick releasers.
M size.
All purpose chicken loop: freeriding, freestyling, wave riding and hydrofoiling
The newest reference for kiteboarding!
The AKA 3 chicken loop is the most compact quick release system on the market, with a stainless steel ball bearing. The ball bearing works really well to untwist the power lines, even when you sheet in.
Afnor NF S 52-503 and ISO 21853 compliant.
Stainless steel ring with opening for front kite line.
This is a new ring for 2017, which replaces the traditional ring with stop ball that retains the front line that is connected to the safety rope and leash.
This special ring brings extra security, because the opening through which the line goes has always the same dimension, and will keep it overtime, unlike a stopball.
Set of 2 Kite attitude back leader lines available in green / blue or red / blue. In Dyneema 3 mm
Each leader line is equipped with a spliced loop for a simple and secure connection. Solidity of about 700 kg for maximum reliability.
You want to fly any kite on the market, with the same Control Bar, from 4 m2 to 14 m2? 4 or 5 lines? Inflatable or foil kite?
The Totem Vario Pro Model is the true universal bar that can do it!
It takes only 2 seconds to change the spacing between the steering lines. You can speed up your kite or slow it down. The only bar on the market to offer such versatility
Stock clearance - race kite lines
SK 75 dyneema lines
300 kg strength
Kite attitude Safety Line connecting the leash ring and one of the power lines of the kite.
The CLAMCLEAT RACING AEROCLEAT is the absolute reference in cleats for kitesurfing. Its plastic base makes it easy to adjust the CLAMCLEAT position in height on the depower rope, in order to accurately set the length and height of the depower rope according to your practice and your size (adult, child, ...).
Front leader line.
Made of strong 4 mm dyneema. Can sustain about 700 kg.
Designed for a high V (high split point), not for a low V
Here is Ideal universal bar Kite kite attitude for freestyle, foil and wave
Compatible in 4 or 5 lines. Ultra light (≈ 450 g), it integrates the New AKA 3 with stainless steel ball bearing and High-end lines in Dyneema, without elasticity for instantaneous control. Perfect for inflatable kites, single skin kites, or foil kites.
Upgrade kit to convert a AKA 1 chicken loop to a AKA 2 version.
The swivel and T bone are now made of light alloy.
This kit only contains an alloy swivel and an alloy T Bone. It does not contain the chicken loop nor the quick releaser. It assumes you already have a AKA chicken loop/quick releaser.
A unique accessory to move the split point of your control bar up or down!
It was designed to address a concern of those who consider it is necessary to have the split point at the same place as the original control bar.
It is very smart: no wrench or screwdriver required, just press it to change the height of the split point. It is does not damage your lines.
Learn more...
