The CLAMCLEAT RACING AEROCLEAT is the absolute reference in cleats for kitesurfing. Its plastic base makes it easy to adjust the CLAMCLEAT position in height on the depower rope, in order to accurately set the length and height of the depower rope according to your practice and your size (adult, child, ...).
By default, the bar is set up with about 50 cm between the top of the quick release and the bottom of the cleat, a length above the market average. This very versatile setup is ideal for wave riding and offers better control in gusty conditions, particularly common in the South of France.
Note: with the double-pulley setup, the depower line is about 60 cm, or even 70 cm if you opted for 70 cm.
If you want a even longer depower line (especially if you are tall), you can simply raise the cleat.
Conversely, if you are shorter or if you practice freestyle, you can lower the cleat to access the trim more easily.
This screw-on stopper ball is meant to be installed below the Clamcleat onto the depower rope.
It will protect the Aerocleat if the bar hits the cleat.
This connector is meant to connect the front lines directly to the trim pulley.
Works for all kite school bars, race foil bars, and all bars with no front leader lines (4 direct lines).
Kite attitude Safety Line connecting the leash ring and one of the power lines of the kite.
Elastics for universal freestyle wave control bars
Scroll this page down to view instructions to install the elastics on the universal freestyle wave control bar.
Universal kit for race foil bar.
Ideal for carbon bars. Trim with double pulley.
3 world champions use this standard setup!
Connector for back leader lines of Totem universal kite bars
New AKA quick releaser: revolutionizing the kitesurfing world!
This is the shortest quick releaser on the market, with a swivel on top. It is about 1 1/2 to 2 inches shorter than usual quick releasers/chicken loops.
Highly secure: requires very little strength to release in case the kite pulls very hard (French Afnor NF S 52-503).
The Kite Attitude freestyle wave stick offers an ergonomic and very soft grip, ideal for navigating hours without fatigue or bulbs. Perfect for those looking for comfort and precision in kite.
Dyneema Depower Rope and Trim
Comes with a trim handle covered with Velcro to easily hook the trim handle next to the clamcleat after trimming. A set ultra-resistant, ideal for replacing or optimizing your trim system.
Set of 2 Kite attitude back leader lines available in green / blue or red / blue. In Dyneema 3 mm
Each leader line is equipped with a spliced loop for a simple and secure connection. Solidity of about 700 kg for maximum reliability.
Stainless steel ring with opening for front kite line.
This is a new ring for 2017, which replaces the traditional ring with stop ball that retains the front line that is connected to the safety rope and leash.
This special ring brings extra security, because the opening through which the line goes has always the same dimension, and will keep it overtime, unlike a stopball.
Upgrade kit to convert a AKA 1 chicken loop to a AKA 2 version.
The swivel and T bone are now made of light alloy.
This kit only contains an alloy swivel and an alloy T Bone. It does not contain the chicken loop nor the quick releaser. It assumes you already have a AKA chicken loop/quick releaser.
Ultra-resistant pulley, capable of supporting up 700 kg. It offers optimal comfort for pull the trim easily And is right above the cuckold cleat.
This screw-on stopper ball is meant to be installed below the Clamcleat onto the depower rope.
It will protect the Aerocleat if the bar hits the cleat.
This stopper ball has been specially designed for maximum durability with glass fiber.
Ultra-resistant pulley, capable of supporting up 700 kg. It offers optimal comfort for pull the trim easily And is right above the cuckold cleat.
Set of 2 power lines.
Real dyneema lines.
Strength higher than 400 kg.
The best possible quality. Low (or no) stretch at all.
The Kite Attitude Carbon Race Foil Bar Depower Rope is an essential component of the control system, ensuring smooth, precise, and safe riding. Designed specifically for competition-grade carbon bars and AKA 3 or 4 quick release systems (it also works with older versions 1 and 2), it offers excellent wear resistance and optimal comfort, whether you’re kitesurfing, foiling, or snowkiting.
Available either with PU coating or Textile Sleeve.
Chicken loop rope for AKA quick releaser version 1, 2 or 3.
3 sizes are available: XS, S, M
The new XS size works only for XS chicken loop without donkey dick, for rope harnesses.
5th line extension for set of 4 kite line extensions.
If you order kite line extensions, don't forget to add the 5th line if your kite has 5 lines.
4 or 7 meters fifth line extensions. Other length : it is possible, just contact us.
Stainless steel ring with opening for front kite line.
This is a new ring for 2017, which replaces the traditional ring with stop ball that retains the front line that is connected to the safety rope and leash.
This special ring brings extra security, because the opening through which the line goes has always the same dimension, and will keep it overtime, unlike a stopball.
The CLAMCLEAT RACING AEROCLEAT is the absolute reference in cleats for kitesurfing. Its plastic base makes it easy to adjust the CLAMCLEAT position in height on the depower rope, in order to accurately set the length and height of the depower rope according to your practice and your size (adult, child, ...).
